CLOSED
  • Model: SB-6351R
    UPC: 4718091635105

The SB-6351R HDBaseT™ Receiver can receive the HDMI, Ethernet, PoH power (48VDC) from the transmitter or IR remote input to a transmitter or output to a source and the RS-232 interface signal I/O to a HDBaseT™ transmitter (SB-6335T5 PoH) via a single LAN (category) cable for long distances up to 328 ft (100M) maximum. The SB-6351R Receiver uses a UTP/FTP CAT5e/6/6a/7 (category cable) via a RJ-45 8P8C female socket (supports 568a/b). This product provides higher full HD HDMI 1.4a, resolutions supporting 480i/p, 720p,1080i/p or High 4K2K quality that are identical to the high quality full HDMI 1.4 source signals. This receiver is useful for sending the HDMI digital video / multi-channel audio format, IR remote in or out, Ethernet, RS-232 in, RS-232 out and PoH. Controls signals via a single category cable transmited from a HDBaseT™ transmitter.

COMPATIBLE WITH THE SB-6335T5 TRANSMITTER

EXAMPLE

FEATURES

  • HDBaseT™ TX/RX with 3D, 4K2K over a single UTP/STP cable up to 330 ft (100M)
  • Supports HDMI 1080p@60 video V1.4a 3D and Ultra HD 4K2K video, CEC / HDCP compliant
  • Supports link speeds for TMDS Video formats up to a max 10.2Gbit/s, Signal 340MHz Deep Color, Full HD 1080p@60Hz@24/36/48bit/pixels
  • Supports 1080p TV's at 24/30/60/100/200/240Hz and above as well as Blu-rays at 24FPS
  • Supports Digital Audio 7.1 LPCM 192KHz, 24bits, Full HD Dolby TrueHD and DTS-HD Master Audio uncompressed HD audio formats
  • Supports PoH power DC48V over HDBaseT™ (Power supports 48VDC from SB-6335T5 Transmitter)
  • Transfers Bi-directional Infrared control signal together with the HDMI signal
  • RS-232 port for firmware updates or RS-232 control signal transmission
  • Supports HDMI CEC between your connected source and display gear
  • LED indicators show the HDCP/LINK/POWER/POE status
  • HDBaseT™ transfers HDMI, PoE, LAN, RS-232 and Bi-Directional IR over single category cable
  • Supports Super Audio CD (DSD), CEC commands protocol table

SPECIFICATION

  • Type of Extender: HDBaseT™ RX using HDMI signal over category UTP/STP Cable
  • Input Signals: HDMI with Digital Video (TMDS)/Audio 0.5~1.0Vp-p, DDC 5Vp-p
  • HDBaseT™ Signal Supports: HDMI 1.4a HDMI standard format, DVI and HDCP Compliant
  • Video Supports: HDMI and DVI TMDS format for 1920x1200 resolutions up to 10.2Gbps (340MHz), Digital RGB 48bits/px, deep color, 3D
  • Category Cable Supported: CAT5e, CAT6, CAT6a, CAT7 UTP/STP cable
  • Supports HDMI Resolutions: 480p, 720p 1080i/1080p and Ultra HD 4K2K
  • Scan Rate Accepted: Supports HDMI full HD Resolutions; Frequency 24Hz to 240Hz
  • Controls: IR in / IR out / RS-232 I/O / LAN series interface
  • Rx High Input Impedance: 1MΩ differential
  • PoH Supported: HDBaseT™ Receiver supports 48VDC power from a Transmitter (SB-6335T5)
  • Transfer Distance: Up to 330 ft (100M)
  • Low Distortion:
    • Tx: 68dB SFDR@5MHz 200Ω load
    • Rx: 1Vp-p@5MHz
  • HDMI I/O Connectors: HDMI Type A - SMD 19pin female type
  • HDBaseT™ I/O Connectors: HDBaseT™ RJ-45, 8p8c female socket
  • Temperature: 32°F - 122°F Operation (0°C ~ 50°C)
  • Safety Approvals: CE, FCC, VCCI , REACH
  • Dimensions (LxWxH): 4.33 x 4.73 x 1.38 in (110x120x35mm)
  • Weight: 1.0 lb / (Unit only) / 1.5 lb (Net)
  • Power Consumption: Max 1000mA (Full load 1080p-60Hz signal with use DC48V input)

*Does not support ARC

INCLUDED

  • SB-6351R HDBaseT™ Receiver console
  • HDMI Locking Post Replacement Screws
  • Optional: SB-100 IR Extender Receiver Set
  • Optional: SB-101 IR Extender Transmitter Set
  • Optional: SB-100C IR Extender Receiver Cable (6.5 ft (2M))
  • Optional: SB-101C IR Extender Transmitter Cable (6.5 ft (2M))
  • Users Guide