DISCONTINUED - ALL SALES FINAL
The SB-6351R HDBaseT™ Receiver can receive the HDMI, Ethernet, PoH power (48VDC) from the transmitter or IR remote input to a transmitter or output to a source and the RS-232 interface signal I/O to a HDBaseT™ transmitter (SB-6335T5 no longer available) via a single LAN (category) cable for long distances up to 328 ft (100M) maximum. The SB-6351R Receiver uses a UTP/FTP CAT5e/6/6a/7 (category cable) via a RJ-45 8P8C female socket (supports 568a/b). This product is compatible with higher full HD HDMI 1.4a, resolutions supporting 480i/p, 720p,1080i/p or High 4K2K quality that are identical to the high quality full HDMI 1.4 source signals. This receiver is useful for sending the HDMI digital video / multi-channel audio format, IR remote in or out, Ethernet, RS-232 in, RS-232 out and PoH. Controls signals via a single category cable transmited from a HDBaseT™ transmitter.

FEATURES
- HDBaseT™ TX/RX with 3D, 4K2K over a single UTP/STP cable up to 330 ft (100M)
- Compatible with HDMI 1080p@60 video V1.4a 3D and Ultra HD 4K2K video, CEC / HDCP compliant
- Supports link speeds for TMDS Video formats up to a max 10.2Gbit/s, Signal 340MHz Deep Color, Full HD 1080p@60Hz@24/36/48bit/pixels
- Supports 1080p TV's at 24/30/60/100/200/240Hz and above as well as Blu-rays at 24FPS
- Supports Digital Audio 7.1 LPCM 192KHz, 24bits, Full HD Dolby TrueHD and DTS-HD Master Audio uncompressed HD audio formats
- Supports PoH power DC48V over HDBaseT™ (Power supports 48VDC from SB-6335T5 Transmitter)
- Transfers Bi-directional Infrared control signal together with the HDMI signal
- RS-232 port for firmware updates or RS-232 control signal transmission
- Supports HDMI CEC between your connected source and display gear
- LED indicators show the HDCP/LINK/POWER/POE status
- HDBaseT™ transfers HDMI, PoE, LAN, RS-232 and Bi-Directional IR over single category cable
- Supports Super Audio CD (DSD), CEC commands protocol table
SPECIFICATION
- Type of Extender: HDBaseT™ RX using HDMI signal over category UTP/STP Cable
- Input Signals: HDMI with Digital Video (TMDS)/Audio 0.5~1.0Vp-p, DDC 5Vp-p
- HDBaseT™ Signal Supports: Compatible with HDMI 1.4a HDMI standard format, DVI and HDCP Compliant
- Video Supports: HDMI and DVI TMDS format for 1920x1200 resolutions up to 10.2Gbps (340MHz), Digital RGB 48bits/px, deep color, 3D
- Category Cable Supported: CAT5e, CAT6, CAT6a, CAT7 UTP/STP cable
- Supports HDMI Resolutions: 480p, 720p 1080i/1080p and Ultra HD 4K2K
- Scan Rate Accepted: Supports HDMI full HD Resolutions; Frequency 24Hz to 240Hz
- Controls: IR in / IR out / RS-232 I/O / LAN series interface
- Rx High Input Impedance: 1MΩ differential
- PoH Supported: HDBaseT™ Receiver supports 48VDC power from a Transmitter (SB-6335T5)
- Transfer Distance: Up to 330 ft (100M)
- Low Distortion:
- Tx: 68dB SFDR@5MHz 200Ω load
- Rx: 1Vp-p@5MHz
- HDMI I/O Connectors: HDMI Type A - SMD 19pin female type
- HDBaseT™ I/O Connectors: HDBaseT™ RJ-45, 8p8c female socket
- Temperature: 32°F - 122°F Operation (0°C ~ 50°C)
- Safety Approvals: CE, FCC, VCCI , REACH
- Dimensions (LxWxH): 4.33 x 4.73 x 1.38 in (110x120x35mm)
- Weight: 1.0 lb / (Unit only) / 1.5 lb (Net)
- Power Consumption: Max 1000mA (Full load 1080p-60Hz signal with use DC48V input)
*Does not support ARC
INCLUDED
- SB-6351R HDBaseT™ Receiver console
- HDMI Locking Post Replacement Screws
- Users Guide