The SB-6335R5 HDBaseT™ Receiver can receive HDMI, IR remote in/out, RS-232 in/out, Ethernet and PoH (power over HDBaseT™) from a HDBaseT™ transmitter via a single category cable for long distances up to 928 ft (100M) maximum. The SB-6335R5 uses CAT6, CAT6a or CAT7 (UTP or FTP) category cable with RJ-45 8P8C connectors and supports the 568a or 568b color specification table. This SB-6335R5 receiver provides higher quality full HD HDMI resolutions of 480i/p, 720p, 1080i/p that is identical to the source and to the HD destination display. HDBaseT™ receivers control signals are received via a category cable from the HDBaseT™ Transmitter.
- Inputs:
- (1) HDMI with Digital Video (TMDS)/Audio 0.5~1.0Vp-p, DDC 5Vp-p
- Outputs:
- (1) RS-232
- (1) HDMI
- (1) IR EXT port
FEATURES
- HDBaseT™ HDMI Receiver over single CAT6/6a/7 category LAN cable
- Extends HDMI, IR in/out, RS-232 in/out and (2) Ethernet ports, HDCP compliant
- Supports CAT6, CAT6a and CAT7 UTP/FTP category cable
- Supports link speeds of up to 3.4Gbps
- Supports digital RGB 36bits, V1.4a HDMI TMDS format
- Extends higher quality DVI video for 1920x1200 resolutions
- Supports HD High Definition full range resolutions of 480p, 720p 1080i/1080p
- Supports long distances up to 328 ft/100M between the HDBaseT™ Transmitter and HDBaseT™ Receiver
- Supports wall mount and rack mount installation for 19 inch 4U rack mount
- Supports DC input power with low power consumption (Full load 850mA)
- Optional universal power supply switch 50/60Hz, 100~240VAC
SPECIFICATION
- Type of Extender: HDBaseT™ Receiver for HDMI signal over a category LAN Cable
- Input Signals: HDMI with Digital Video (TMDS)/Audio 0.5~1.0Vp-p, DDC 5Vp-p
- HDBaseT™ Supportd: HDMI Standard, DVI and HDCP Compliant
- Video Supported: HDMI and DVI TMDS formats for 1920x1200 resolutions up to 3.4Gbps Digital RGB 36bits deep color, 3D 1.4a HDMI format
- HDMI Audio Out Supports: Multi-channel Audio Formats 5.1 / 7.1, MAT(MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6.1, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH)
- PoH Supported: HDBaseT™ Receiver with PoH (power over HDBaseT™)
- Category Cable Supported: CAT6, CAT6a, CAT7 UTP/FTP cable
- Supportd HDMI Resolutiond: 480p, 720p, 1080i/1080p
- Scan Rate Accepted: Supports HDMI full HD Resolutions; Frequency 24Hz to 60Hz
- Control: (1) IR in/out, (1) IR in/out, (1) RS-232 and (1) LAN series interface
- IR Infrared Frequency: 38KHz
- Extender Distance: Up to 100M (CAT6)
- Safety Approvals: CE, FCC, VCCI, REACH & WEEE
- Dimensions (LxWxH): 5.31 x 5.11 x 1 in (135x130x26mm)
- Rack Mount: Uses a total of 10 pcs installed into one 19 inch rack mount
- Weight: 1.1 lb (Unit only) / 2.0 lb (Net)
- Power Consumption: Max 850mA (Full load 1080p-60Hz signal with use DC12V input)
- Power Supply: Optional Power Input +12VDC, 2A, (Universal Type 50/60Hz, 100~240VAC)
*Does not support ARC
INCLUDED
- SB-6335R5 HDBaseT™ Receiver console
- SB-100C IR Extender Receiver Cable (6.5 ft (2M))
- SB-101C IR Extender Transmitter Cable (6.5 ft (2M))
- SB-100 IR Extender Receiver Set
- SB-101 IR Extender Transmitter Set
- 1 in High wall mount pack (Part # WM-1INCH-L80MM)
- HDMI Locking Post Replacement Screws
- Optional: AC/DC Adapter: 12VDC, 2A (universal power switch 50/60Hz,100~240VAC)
- Users Guide