SB-6335R ~5 week lead-time after receipt of payment.
The SB-6335R HDBaseT™ receiver can receive HDMI, IR in/out, IR remote in/out and RS-232 I/O signals from a HDBaseT™ Transmitter via a single category cable for long distances up to 328 ft (100M) maximum. SB-6335R uses a single category LAN CAT6, CAT6a or CAT7 (UTP or FTP) cable with RJ-45 8P8C connectors and supports the 568a or 568b color specification table. This HDBaseT™ receiver provides higher full HD HDMI resolutions of 480i/p, 720p, 1080i/p and 4K2K quality that is identical to the source and to the HD destination display. Receives HDMI digital video, digital multi-channel audio signals, IR in/out and RS-232 series interface signals via a single category cable from the HDBaseT™ Transmitter.
- Inputs:
- Outputs:
- (1) RS-232
- (1) HDMI
- (1) IR EXT port
INSTALLATION

FEATURES
- HDBaseT™ HDMI Receiver over asingle category LAN cable
- Extender for HDMI, IR in/out and RS-232 series interface in/out and is HDCP compliant
- Supports a CAT6, CAT6a and CAT7 UTP/FTP category cable
- Supports link speeds of up to 3.4Gbps
- Supports Digital RGB 36bits, compatible with HDMI 1.4 TMDS format
- Extends higher quality DVI video for 1920x1200 resolution
- Supports HD High Definition full range resolutions 480p, 720p 1080i/1080p and 4K2K
- Supports long distances up to 328 ft/100M between HDBaseT™ Transmitter and HDBaseT™ Receiver
- Supports wall mount pack and rack mount installed for a 19 inch 4U Rack mount
- Supports power DC input with low power consumption (Full load 850mA)
- Power supply universal power switch 50/60Hz, 100~240VAC
SPECIFICATION
- Type of Extender: HDBaseT™ Receiver for HDMI signal over one category LAN Cable
- Input Signals: HDMI with Digital Video (TMDS)/Audio 0.5~1.0Vp-p, DDC 5Vp-p
- HDBaseT™ Supports: Compatible with HDMI 1.4 Standards, DVI and HDCP Compliant
- Video Supported: HDMI and DVI TMDS format for 1920x1200 resolution up to 3.4Gbps Digital RGB 36bits deep color, 3D 1.4a HDMI format
- HDMI Audio Out Supports: Multi-channel Audio Formats 5.1 / 7.1, MAT(MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6.1, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH)
- RS-232 Series Supports: (1) RS-232 series interface port (Terminal Block 3pin female socket)
- Category Cable Supported: CAT6, CAT6a, CAT7 UTP/FTP cable
- Supports HDMI Resolutions: 480p, 720p, 1080i/1080p, 4K2K
- Scan Rate Accepted: Supports HDMI full HD resolutions; Frequency 24Hz to 60Hz
- Control: (1) IR in/out, (1) IR in/out, (1) RS-232 and (1) LAN series interface
- IR Infrared Frequency: 38KHz
- Extender Distance: Up to 100M (CAT6)
- Safety Approvals: CE, FCC, VCCI, REACH & WEEE
- Dimensions (LxWxH): 3.15 x 5.12 x 1 in (80x130x26mm)
- Rack Mount: Use total 10 pcs installation into one 19 inch rack mount
- Weight: 0.325 Kgs / 0.715 lb
- Power Consumption: Max 750mA (Full load 1080p-60Hz signal with use DC12V input)
- Power Supply: Power Input +12VDC, 2A, (Universal Type 50/60Hz, 100~240VAC)
INCLUDED
- SB-6335R HDBaseT™ Receiver console
- SB-100 IR Extender Receiver Set
- SB-101 IR Extender Transmitter Set
- SB-100C IR Extender Receiver Cable (6.5 ft (2M))
- SB-101C IR Extender Transmitter Cable (6.5 ft (2M))
- 1 in High wall mount pack (Part # WM-1INCH-L80MM)
- HDMI Locking Post Replacement Screws
- AC/DC Adapter: 12VDC/2A (universal power switch 50/60Hz, 100~240VAC)
- Users Guide
*Does not support ARC