HDMI HDBaseT™ up to 330 ft (100M) (2-Way IR, RS-232, HDMI) - RECEIVER

SB-6335R ~5 week lead-time after receipt of payment.

The SB-6335R HDBaseT™ receiver can receive HDMI, IR in/out, IR remote in/out and RS-232 I/O signals from a HDBaseT™ Transmitter via a single category cable for long distances up to 328 ft (100M) maximum. SB-6335R uses a single category LAN CAT6, CAT6a or CAT7 (UTP or FTP) cable with RJ-45 8P8C connectors and supports the 568a or 568b color specification table. This HDBaseT™ receiver provides higher full HD HDMI resolutions of 480i/p, 720p, 1080i/p and 4K2K quality that is identical to the source and to the HD destination display. Receives HDMI digital video, digital multi-channel audio signals, IR in/out and RS-232 series interface signals via a single category cable from the HDBaseT™ Transmitter.

• Inputs:
  • (1) CAT5/6 UTP
• Outputs:
  • (1) RS-232
  • (1) HDMI
  • (1) IR EXT port

INSTALLATION

FEATURES

• HDBaseT™ HDMI Receiver over asingle category LAN cable
• Extender for HDMI, IR in/out and RS-232 series interface in/out and is HDCP compliant
• Supports a CAT6, CAT6a and CAT7 UTP/FTP category cable
• Supports link speeds of up to 3.4Gbps
• Supports Digital RGB 36bits, compatible with HDMI 1.4 TMDS format
• Extends higher quality DVI video for 1920x1200 resolution
• Supports HD High Definition full range resolutions 480p, 720p 1080i/1080p and 4K2K
• Supports long distances up to 328 ft/100M between HDBaseT™ Transmitter and HDBaseT™ Receiver
• Supports wall mount pack and rack mount installed for a 19 inch 4U Rack mount
• Supports power DC input with low power consumption (Full load 850mA)
• Power supply universal power switch 50/60Hz, 100~240VAC

SPECIFICATION

• Type of Extender: HDBaseT™ Receiver for HDMI signal over one category LAN Cable
• Input Signals: HDMI with Digital Video (TMDS)/Audio 0.5~1.0Vp-p, DDC 5Vp-p
• HDBaseT™ Supports: Compatible with HDMI 1.4 Standards, DVI and HDCP Compliant
• Video Supported: HDMI and DVI TMDS format for 1920x1200 resolution up to 3.4Gbps Digital RGB 36bits deep color, 3D 1.4a HDMI format
• HDMI Audio Out Supports: Multi-channel Audio Formats 5.1 / 7.1, MAT(MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6.1, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH)
• RS-232 Series Supports: (1) RS-232 series interface port (Terminal Block 3pin female socket)
• Category Cable Supported: CAT6, CAT6a, CAT7 UTP/FTP cable
• Supports HDMI Resolutions: 480p, 720p, 1080i/1080p, 4K2K
• Scan Rate Accepted: Supports HDMI full HD resolutions; Frequency 24Hz to 60Hz
• Control: (1) IR in/out, (1) IR in/out, (1) RS-232 and (1) LAN series interface
• IR Infrared Frequency: 38KHz
• Extender Distance: Up to 100M (CAT6)
• Safety Approvals: CE, FCC, VCCI, REACH & WEEE
• Dimensions (LxWxH): 3.15 x 5.12 x 1 in (80x130x26mm)
• Rack Mount: Use total 10 pcs installation into one 19 inch rack mount
• Weight: 0.325 Kgs / 0.715 lb
• Power Consumption: Max 750mA (Full load 1080p-60Hz signal with use DC12V input)
• Power Supply: Power Input +12VDC, 2A, (Universal Type 50/60Hz, 100~240VAC)

INCLUDED

• SB-6335R HDBaseT™ Receiver console
• SB-100 IR Extender Receiver Set
• SB-101 IR Extender Transmitter Set
• SB-100C IR Extender Receiver Cable (6.5 ft (2M))
• SB-101C IR Extender Transmitter Cable (6.5 ft (2M))
• 1 in High wall mount pack (Part # WM-1INCH-L80MM)
• HDMI Locking Post Replacement Screws
• AC/DC Adapter: 12VDC/2A (universal power switch 50/60Hz, 100~240VAC)
• Users Guide

*Does not support ARC