HDMI HDBaseT™ up to 330 ft (100M) (2-Way IR, RS-232, HDMI) - TRANSMITTER

SB-6335T ~5 week lead-time after receipt of payment.

The SB-6335T HDBaseT™ Transmitter can transmit the HDMI signal, IR remote input or output signals and RS-232 I/O series interface to the HDBaseT™ Receiver (SB-6335R) via a single category LAN cable for the long distances up to a maximum 328 ft (100M). The Transmitter uses a single CAT6, CAT6a or CAT7 (UTP/FTP) category cable via a RJ-45 8P8C female socket. The LAN cable supports the 568a or 568b LAN color specification table. This product provides higher full HD HDMI 1.4a, HDTV resolution and support for 480i/p, 720p,1080i/p or High 4K2K quality that is identical to the source high quality full HDMI 1.4 signals. The Transmitter is useful for sending HDMI digital video & digital multi-channel audio format signals, IR remote in or out and RS-232 series in and out control signals via a single category cable transmitted to the HDBaseT™ Receiver.

• Inputs:
  • (1) RS-232
  • (1) HDMI
  • (1) IR EXT port
• Outputs:
  • (1) CAT5/6 UTP

INSTALLATION

FEATURES

• HDBaseT™ Transmitter extends the HDMI over single CAT5e/6/6a category 328 ft /100M LAN cable
• Transmits HDMI, IR in/out and RS-232 I/O series interface signals
• Uses a single CAT6, CAT6a and CAT7 (UTP or FTP) category cable
• Supports link speeds of up to 3.4Gbps, compatible with HDMI 1.4, full HD 4K2K signal, HDCP compliant
• Supports Digital RGB 36bits, HDMI digital video TMDS, digital multi-channel audio format
• Extends higher quality full HD DVI video WUXGA 1920x1200 resolution
• Supports High Definition worldwide range resolution 480p, 720p 1080i/1080p-60Hz and 4K2K
• Extends long distances up to 328 ft (100M) between HDBaseT™ Transmitter and Receiver
• Supports wall mount installation- total 10 pcs. into one 19 inch 4U rack mount
• Power input via DC with low power consumption (Full load 750mA)
• Power supply universal power switch 50/60Hz, 100~240VAC

SPECIFICATION

• Type of Extender: HDBaseT™ Transmitter for HDMI over single category 328 ft /100M Cable
• Input Signals: HDMI with Digital Video(TMDS)/Audio 0.5~1.0Vp-p, DDC 5Vp-p
• HDBaseT™ Compatible With: HDMI 1.4 Standards, DVI and HDCP Compliant
• Video Supported: HDMI and DVI TMDS format for 1920x1200 resolution up to 3.4Gbps Digital RGB 36bits deep color, 3D 1.4a HDMI format
• Audio I/O Support: Multi-channel Audio Formats 5.1 / 7.1, MAT(MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6.1, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH)
• Extender Distance: Up to 328 ft (100M) via (UTP or FTP CAT6 100M cable)
• Cable Supported: CAT6, CAT6a, CAT7 use UTP or FTP category cable
• Supports HDMI Resolutions: 480p, 720p, 1080i/1080p@60Hz or 4K2K@24Hz
• Scan Rate Accepted: Supports HDMI full HD Resolutions; Frequency 24Hz to 60Hz
• Control: (1) IR in, (1) IR out and (1) RS-232 I/O series interface
• IR Infrared Frequency: 38KHz
• Safety Approvals: CE, FCC, VCCI, REACH & WEEE
• Dimensions (LxWxH): 5.12 x 3.14 x 1.14 in (130x80x29mm)
• Wall Mount: Wall mount pack (p/n:VM-1inch-L80MM)
• Rack Mount: Total 10 pcs installs into 19 inch 4U rack mount
• Weight: 0.375 Kgs / 0.825 lb
• Power Consumption: Max 750mA (Full load 1080p-60Hz signal with use DC12V input)
• Power Supply: Power Input +12VDC, 2A, (Universal Type 50/60Hz, 100~240VAC)

INCLUDED

• SB-6335T HDBaseT™ Transmitter console
• SB-100 IR Extender Receiver Set
• SB-101 IR Extender Transmitter Set
• SB-100C IR Extender Receiver Cable (6.5 ft (2M))
• SB-101C IR Extender Transmitter Cable (6.5 ft (2M))
• 1 in High wall mount pack (Part # WM-1INCH-L80MM)
• HDMI Locking Post Replacement Screws
• AC/DC Adapter: 12VDC/2A (universal power switch 50/60Hz, 100~240VAC)
• Users Guide