ShinybowUSA

SB-6335T4: 4-Play HDBaseT™ Transmitter up to 330 ft (100M) (Single LAN, 2-Way IR, RS-232, HDMI)
[SB-6335T4]
UPC/ENA: 4718091633545

$340.00

Click to enlarge

SB-6335T4

The SB-6335T4 HDBaseT™ Transmitter can transmit the HDMI signal, IR remote input or output signals, RS-232 I/O interface signal and Ethernet series interface to the HDBaseT™ Receiver (SB-6335R4) via single category LAN cable for the long distances of maximum 328 feet (100M). This Transmitter uses a single UTP/FTP (category cable) CAT5e, CAT6, CAT6a or CAT7 via RJ-45 8P8C female socket. The LAN cable supports the 568a or 568b LAN color specification table. This product provides higher full HD HDMI 1.4a, and supports resolutions 480i/p, 720p,1080i/p or high 4K2K quality that is identical to the source high quality full HDMI 1.4 signal. The Transmitter is useful for sending the HDMI digital video / multi-channel audio format, IR remote in or out, RS-232 series in/out and Ethernet controls signals via single category cable transmitted to the HDBaseT™ Receiver.

Inputs:

(1) RS-232
(1) HDMI
(1) IR EXT port

Outputs:

(1) HDMI with Digital Video (TMDS) /Audio 0.5~1.0Vpp, DDC 5Vpp

FEATURES
SPECIFICATIONS
WHAT'S INCLUDED
PHOTOS
DOCUMENTS

HDBaseT™ Transmitter extends the HDMI over single CAT5e/6/6a category 328 feet/100M LAN cable
Transmits HDMI, IR in/out and RS-232 I/O series interface signals
Uses CAT6, CAT6a and CAT7 (UTP or FTP) single category cable
Supports link speeds of up to 3.4Gbps, HDMI 1.4, full HD 4K2K signal, HDCP compliant
Supports Digital RGB 36bits, HDMI digital video TMDS, digital multi-channel audio format
Extends higher quality full HD DVI video WUXGA 1920x1200 resolution
Supports High Definition worldwide range resolutions 480p, 720p, 1080i/1080p-60Hz and 4K2K
Extends long distances up to 328 feet (100M) between the HDBaseT™ Transmitter and Receiver
Supports wall mount installation - total 10 pcs into one 19 inch 4U rack mount
Power input via DC with low power consumption (Full load 750mA)
Power supply universal power switch 50/60Hz, 100~240VAC

Type of Extender: HDBaseT™ Transmitter for HDMI over single category 328 feet/100M cable
Input Signals: HDMI with Digital Video (TMDS)/Audio 0.5~1.0Vpp, DDC 5Vpp
HDBaseT™ Supports: HDMI 1.4 Standard, DVI and HDCP Compliant
Video Supported: HDMI and DVI TMDS format for 1920x1200 resolutions up to 3.4Gbps digital RGB 36bits deep color, 3D 1.4a HDMI format
Audio I/O Supports: Multi-channel audio formats 5.1 / 7.1, MAT (MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6.1, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH)
Cable Supported: CAT6, CAT6a, CAT7 use UTP or FTP category cable
Supports HDMI Resolutions: 480p, 720p, 1080i/1080p@60Hz or 4K2K@24Hz
Scan Rate Accepted: Supports HDMI full HD resolutions; Frequency 24Hz to 60Hz
Control: (1) IR in, (1) IR out and (1) RS-232 I/O series interface
IR Infrared Frequency: 38KHz
Safety Approvals: CE, FCC, VCCI, REACH & WEEE
Dimensions (LxWxH): 5.25 x 5.12 x 1 in
Wall Mount: Wall mount pack (p/n:VM-1inch-L80MM)
Rack Mount: Total 13 pcs installs into a 19 inch 4U rack mount
Weight: 1.1 lb (Unit only) / 2.9 lb (Net)
Power Consumption: Max 750mA (Full load 1080p-60Hz signal with use DC12V input)
Power Supply: Power Input +12VDC, 2A, (Universal Type 50/60Hz, 100~240VAC)

*Does not support ARC

SB-6335T4 HDBaseT™ Transmitter console
SB-100 IR Extender Receiver Set
SB-101 IR Extender Transmitter Set
SB-100C IR Extender Receiver Cable (6.5ft (2M))
SB-101C IR Extender Transmitter Cable (6.5ft (2M))
1 in High wall mount pack (Part # WM-1INCH-L80MM)
HDMI Locking Post Replacement Screws
Users Guide
AC/DC Adapter: 12VDC/2A (universal power switch 50/60Hz, 100~240VAC)

USERS GUIDE

FEATURES

SPECIFICATIONS

WHAT'S INCLUDED

PHOTOS

DOCUMENTS