• Model: SB-6335T&R KIT
    UPC: 4718091033505


SB-6335T/R KIT ~5 week lead-time after receipt of payment.

The SB-6335R HDBaseT™ receiver can receive HDMI, IR in/out, IR remote in/out and RS-232 I/O signals from a HDBaseT™ Transmitter via a single category cable for long distances up to 328 ft (100M) maximum. SB-6335R uses a single category LAN CAT6, CAT6a or CAT7 (UTP or FTP) cable with RJ-45 8P8C connectors and supports the 568a or 568b color specification table. This HDBaseT™ receiver provides higher full HD HDMI resolutions of 480i/p, 720p,1080i/p and 4K2K quality that is identical to the source and to the HD destination display. Receives HDMI digital video, digital multi-channel audio signals, IR in/out and RS-232 series interface signals via a single category cable from the HDBaseT™ Transmitter.

The SB-6335T HDBaseT™ Transmitter can transmit the HDMI signal, IR Remote signals input or output and RS-232 I/O series interface to the HDBaseT™ Receiver (SB- 6335R) via a single category LAN cable for the long distances up to a maximum 328 ft (100M). The Transmitter uses a single CAT6, CAT6a or CAT7 (UTP/FTP) category cable via a RJ-45 8P8C female socket. The LAN cable supports the 568a or 568b LAN color specification table. This product provides higher full HD HDMI 1.4a, HDTV resolution support for 480i/p, 720p,1080i/p or High 4K2K quality that are identical to the source high quality full HDMI 1.4 signals. The Transmitter is useful for sending the HDMI digital video & digital multi-channel audio format signals, IR remote in or out, RS-232 series in and out controls signals via a single category cable transmitted to the HDBaseT™ Receiver.

  • SB-6335T Transmitter
    • Inputs:
      • (1) RS-232
      • (1) HDMI
      • (1) IR EXT port
    • Outputs:
      • (1) CAT5/6 UTP
  • SB-6335R Receiver
    • Inputs:
      • (1) CAT5/6 UTP
    • Outputs:
      • (1) RS-232
      • (1) HDMI
      • (1) IR EXT port

INSTALLATION

EXAMPLE

FEATURES

RECEIVER

  • HDBaseT™ HDMI Receiver over a single CAT6/6a/7 category LAN cable
  • Extends HDMI, IR in/out, RS-232 in/out and Ethernet ports, HDCP compliant
  • Uses CAT6, CAT6a and CAT7 UTP/FTP category cable
  • Supports link speeds of up to 3.4 Gbps
  • Supports Digital RGB 36bits, V1.4a HDMI TMDS format
  • Extends higher quality DVI video 1920x1200 resolution
  • Supports HD High Definition full range resolution 480p, 720p 1080i/1080p
  • Supports long distances up to 328 ft/100M between HDBaseT™ Transmitter and HDBaseT™ Receiver
  • Supports wall mount pack and rack mount installation for 19 inch 4U rack mount
  • Power supports DC input with low power consumption (Full load 850mA)
  • Power supply using universal power switch 50/60Hz, 100~240VAC

TRANSMITTER

  • HDBaseT™ Transmitter extends the HDMI over single CAT5e/6/6a category 328 ft /100M LAN cable
  • Transmits HDMI, IR in/out and RS-232 I/O series interface signals
  • Uses a single CAT6, CAT6a and CAT7 (UTP or FTP) category cable
  • Supports link speeds of up to 3.4 Gbps, HDMI 1.4, full HD 4K2K signal, HDCP compliant
  • Supports Digital RGB 36bits, HDMI digital video TMDS, digital multi-channel audio format
  • Extends higher quality full HD DVI video WUXGA 1920x1200 resolution
  • Supports High Definition worldwide range resolution 480p, 720p 1080i/1080p-60Hz and 4K2K
  • Extends long distances up to 328 ft (100M) between HDBaseT™ Transmitter and Receiver
  • Supports wall mount installation- total 10 pcs. into one 19 inch 4U rack mount
  • Power input via DC with low power consumption (Full load 750mA)
  • Power supply using universal power switch 50/60Hz, 100~240VAC

SPECIFICATION

RECEIVER

  • Type of Extender: HDBaseT™ Receiver for HDMI signal over one category LAN Cable
  • Input Signals: HDMI with Digital Video (TMDS)/Audio 0.5~1.0Vp-p, DDC 5Vp-p
  • HDBaseT™ Supports: HDMI Standard, DVI and HDCP Compliant
  • Video Support: HDMI and DVI TMDS format for 1920x1200 resolution up to 3.4Gbps Digital RGB 36bits deep color, 3D 1.4a HDMI format
  • HDMI Audio Out Supports: Multi-channel Audio Formats 5.1 / 7.1, MAT(MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6.1, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH)
  • RS-232 Series Support: (1) RS-232 series interface port (Terminal Block 3pin female socket)
  • Category Cable Support: CAT6, CAT6a, CAT7 UTP/FTP cable
  • Support HDMI Resolution: 480p, 720p, 1080i/1080p, 4K2K
  • Scan Rate Accepted: Supports HDMI full HD resolutions; Frequency 24Hz to 60Hz
  • Control: (1) IR in/out, (1) IR in/out, (1) RS-232 and (1) LAN series interface
  • IR Infrared Frequency: 38Khz
  • Extend Distance: Up to 100M (CAT6)
  • Safety Approvals: CE, FCC, VCCI, REACH & WEEE
  • Dimensions (LxWxH): 3.15 x 5.12 x 1 in (80x130x26mm)
  • Rack Mount: Use total 10 pcs installation into one 19 inch rack mount
  • Shipping Weight: 0.325 Kgs / 0.715 lb
  • Power Consumption: Max 750mA (Full load 1080p-60Hz signal with use DC12V input)
  • Power Supply: Power Input +12VDC, 2A, (Universal Type 50/60Hz, 100~240VAC)

TRANSMITTER

  • Type of Extender: HDBaseT™ Transmitter for HDMI over single category 328 ft /100M Cable
  • Input Signals: HDMI with Digital Video(TMDS)/Audio 0.5~1.0Vp-p, DDC 5Vp-p
  • HDBaseT™ Supports: HDMI 1.4 Standard, DVI and HDCP Compliant
  • Video Support: HDMI and DVI TMDS format for 1920x1200 resolution up to 3.4 Gbps Digital RGB 36bits deep color, 3D 1.4a HDMI format
  • Audio I/O Support: Multi-channel Audio Formats 5.1 / 7.1, MAT(MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTSES 6.1, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH)
  • Extend Distance: Up to 328 ft (100M) via (UTP or FTP CAT6 100M cable)
  • Cable Support: CAT6, CAT6a, CAT7 use UTP or FTP category cable
  • Supports HDMI Resolutions: 480p, 720p 1080i/1080p@60Hz or 4K2K@24Hz
  • Scan Rate Accepted: Supports HDMI full HD Resolutions; Frequency 24Hz to 60Hz
  • Control: (1) IR in, (1) IR out and (1) RS-232 I/O series interface
  • IR Infrared Frequency: 38Khz
  • Safety Approvals: CE, FCC, VCCI, REACH & WEEE
  • Dimensions (LxWxH): 5.12 x 3.14 x 1.14 in (130x80x29mm)
  • Wall Mount: Wall mount pack (p/n:VM-1inch-L80MM)
  • Rack Mount: Total 10 pcs install into 19 inch 4U rack mount
  • Shipping Weight: 0.375 Kgs / 0.825 lb
  • Power Consumption: Max. 750mA (Full load 1080p-60Hz signal with use DC12V input)
  • Power Supply: Power Input +12VDC, 2A, (Universal Type 50/60Hz, 100~240VAC)

INCLUDED

  • SB-6335R HDBaseT™ Receiver console
  • SB-6335T HDBaseT™ Transmitter console
  • (2) SB-100C IR Receiver w/ attached cable
  • (2) SB-101C IR Emitter w/ attached cable
  • (2) SB-100 IR Receiver w/ assembly plug
  • (2) SB-101 IR Emitter w/ assembly plug
  • (2) 1 inch High Wall mount pack (Part # WM-1INCH-L80MM)
  • (2) AC/DC Adapter: 12VDC/2A (North Amercian Plug)
  • Users Guide